1. <strike id="j329m"></strike>
    2. <big id="j329m"><sup id="j329m"></sup></big>

    3. <code id="j329m"></code>

        NAME

        firehol-modifiers - select IPv4 or IPv6 mode

        SYNOPSIS

        ipv4 definition-or-command argument...

        ipv6 definition-or-command argument...

        [both] definition-or-command argument...

        DESCRIPTION

        When preceded by a modifier, any command or definition can be made to apply to IPv4 or IPv6 only.

        Without a modifier, interface and router definitions and commands that come before either get applied to both IPv4 and IPV6.

        Commands within an interface or router assume the same behaviour as the enclosing definition. You cannot create an IPv4 command within an IPv6 interface or router nor IPv6 within IPv4.

        Examples:

        interface eth0 myboth src4 192.0.2.0/24 src6 2001:DB8::/24
           ipv4 server http accept
           ipv6 server http accept
        
         ipv4 interface eth0 my4only src 192.0.2.0/24
           server http accept
        
         ipv6 interface eth0 my6only src 2001:DB8::/24
           server http accept

        Many definitions and commands have explicitly named variants (such as router4, router6, router46) which can be used as shorthand.

        SEE ALSO

        1比1现金棋牌